Mercedes AMG GT W290 Front Bumper A2908856002 X290 MOPF AMG

Part Number: A2908856002 | Facelift (MOPF) Generation

The A2908856002 is the central structural component for the facelifted Mercedes-AMG GT 4-Door Coupe (X290), often referred to as the MOPF (Modellpflege). Introduced for the 2022 model year and continuing through 2026, this bumper represents the refined, aggressive “shark-nose” styling of the updated GT 43, GT 53, and GT 63 models.  Mercedes AMG GT W290 Front Bumper A2908856002 X290 MOPF AMG

Technical Specifications

Key Facelift (MOPF) Design Changes

The A2908856002 differs from the original 2018–2021 bumper in several key ways:

• Outer Air Intakes: The side air curtains are more vertically oriented and expressive, designed to better channel air around the front wheels.

• Lower Splitter Profile: The central “A-wing” is more pronounced, often featuring a contrasting trim element (Chrome, Gloss Black, or Carbon Fiber).

• Grille Integration: This bumper is specifically molded to house the updated Panamericana grille, which has a slightly different lower curvature compared to the pre-facelift version.

Vehicle Compatibility

This bumper is the correct factory replacement for the following 4-door models:

• AMG GT 43 / GT 53 4MATIC+ (2022–2026)

• AMG GT 63 / GT 63 S 4MATIC+ (2022–2026)

• AMG GT 63 S E Performance (Hybrid models may use a variation of this skin for additional cooling ducts).

Retrofit & Installation Notes

⚠️ Critical Compatibility Warning: If you are attempting to “Facelift” a 2018–2021 car using this bumper (A2908856002), please note:

1. Radar Compatibility: The Distronic radar mounting points behind the star logo may require a new bracket or calibration.

2. Inner Ducting: You will likely need the updated air guides (shrouds) as the older pre-facelift ducts will not align with the new outer intake shapes.

3. Underbody Shield: The front section of the engine splash guard often needs to be replaced with the MOPF version to bolt up to the new lower lip of the bumper.

Accessory Components

To complete the assembly of this bumper skin, you will typically need:

• Radiator Grille: The Panamericana vertical-slat unit.

• Lower Grilles: Left and right mesh inserts.

• Center Air Intake: The large central mesh section.

• Camera Mount: If your car has the 360° Camera (Code 501), a specific housing is required.