BMW F80 M3 LCI Front Package Bumper Bonnet Radiator Fenders
M-Aesthetics | Adaptive LED “Ikon” Technology | S55 Cooling | 2015–2018
This comprehensive Front End Package (often called a “Front Clip”) is used for repairing collision damage or upgrading a 2014–2015 Pre-LCI M3 to the 2016–2018 LCI (Life Cycle Impulse) specifications. While the M3’s metal panels (Bonnet/Fenders) remained consistent, the LCI update introduced the highly desirable Adaptive LED “Ikon” headlights and refined bumper trim. BMW F80 M3 LCI Front Package Bumper Bonnet Radiator Fenders
Core Components in the F80 M3 LCI Package
| Category | Component Detail |
| Bumper Assembly | M3 Front Bumper (Primed) with lower mesh grilles, PDC sensor holes, and air ducts. |
| Sheet Metal | Aluminum Power-Dome Bonnet & Left/Right Wide-Body Fenders. |
| LCI Lighting | LCI2 “Ikon” Adaptive LED Headlights (Hexagonal DRL signature). |
| S55 Cooling Pack | Main Engine Radiator, A/C Condenser, and Low-Temp Charge Cooler Heat Exchanger. |
| Structural | CFRP (Carbon Fiber) Front Strut Brace, Radiator Lock Carrier, and Impact Bar. |
| Grilles | Double-Slat M3 Kidney Grilles (High-Gloss Black/Shadowline). |
S55 Engine Specific Cooling Architecture
The F80 M3 uses a specialized “indirect” cooling system for its S55 twin-turbo engine. A full package must include:
-
Main High-Temp Radiator: For engine block cooling.
-
Front-Mounted Low-Temp Radiator: Specifically for the water-to-air intercooler (Charge Cooler).
-
Side-Mounted Auxiliary Radiator: Located in the wheel arch area for additional oil/coolant thermal management.
-
Oil Cooler: Positioned horizontally at the bottom of the cooling stack (highly vulnerable in front-end impacts).
Technical Compatibility & Retrofit Notes
 Pro-Tip for LCI Headlight Retrofits:
If you are installing LCI “Ikon” LEDs (Part #63117493233/234) on a Pre-LCI car, they are physically a direct fit, but not plug-and-play. You will need the specific LCI LED modules, potentially a wiring harness modification, and VO Coding (Vehicle Order) to prevent flickering or error codes.
-
Bonnet (Hood): The F80 M3 uses an aluminum bonnet with a distinct “Power Dome.” Note that the M4 GTS and M3 CS versions feature a vented version of this bonnet which is also compatible.
-
Fender Vents: M3 front fenders feature the integrated “M3” gill. LCI models typically have high-gloss black inserts rather than the early chrome versions.
-
Carbon Strut Brace: The massive U-shaped carbon fiber brace is a structural component. If buying a used package, inspect this piece carefully for any stress fractures or delamination.
Reviews
There are no reviews yet.