Lamborghini Urus Tail Light Tail Light USA 4ML945069A 4ML945071A

In 2026, the part numbers 4ML945069A (Left) and 4ML945071A (Right) refer specifically to the USA-spec Inner Tail Lights for the Lamborghini Urus.

These are the LED units mounted on the tailgate (trunk lid). Because they are the USA version, they feature distinct lighting behavior compared to European (ECE) versions to meet Department of Transportation (DOT) regulations.

1. Technical Identification

• Left Inner Tail Light (USA): 4ML945069A

• Right Inner Tail Light (USA): 4ML945071A

• Application: Fits all Lamborghini Urus models from 2018 through 2026 (including Urus S and Performante).

• USA vs. EU Difference: * USA (Red Turn Signals): In North America, these lights typically function as both the running light and the turn signal (blinking red).

  • EU (Amber Turn Signals): The European versions have a separate amber (orange) section for turn signals.

  • Warning: If you install USA lights on a European car (or vice-versa), you will trigger a “Bulb Out” or “Lighting System Malfunction” error on the dash due to different wiring and resistance values.

2. 2026 Market Pricing (Per Side)

Prices for Lamborghini lighting remain steep because the units are sealed LED assemblies that cannot be easily repaired.

3. Common “2026” Issues

• Condensation: By 2026, some older 2018–2019 Urus models are showing signs of moisture ingress. If you see fogging inside the lens, the seal has failed. This usually requires replacement, as the LED boards will eventually corrode.

• Micro-cracking: The plastic lenses are high-gloss but can develop “crazing” (tiny internal cracks) if exposed to harsh car wash chemicals or extreme UV heat over several years.

• Dynamic Animation: These lights support the “Coming Home/Leaving Home” animation. If the animation is choppy or certain LEDs stay dark, the internal controller within the light has failed.

4. Installation & Coding

• Plug & Play: If you are replacing a damaged USA light with a new USA light, it is a direct mechanical and electrical swap.

• Alignment: When installing on the tailgate, ensure the horizontal line of the LED strip perfectly aligns with the outer (fender-mounted) tail light. There are adjustable plastic spacers behind the unit to fine-tune this “gap.”

• Conversion: If you are trying to convert a European Urus to USA specs (or vice-versa), simply changing the lights is not enough; you will need to re-program the BCM (Body Control Module) to change the signal output from amber to red.

5. Where to Source

• Scuderia Car Parts / Eurospares: Reliable for worldwide shipping of genuine boxed units.