LAMBORGHINI URUS EXTERIOR MIRRORS CARBON 15 PIN CAMERA

In 2026, the 15-pin Carbon Fiber Exterior Mirror for the Lamborghini Urus is the highest-specification mirror assembly available. The 15-pin configuration is critical because it supports the full suite of modern driver-assist technologies.

1. Technical Identification: Why 15 Pins?

The 15-pin connector is required for vehicles equipped with the Top View (360°) Camera System and the Advanced Driver Assistance Systems (ADAS). The pin breakdown typically covers:

Power Adjustment: Horizontal and vertical movement.
Heating: For defrosting the glass.
Auto-Dimming (Electrochromic): To prevent glare from trailing vehicles.
Power Folding: To tuck the mirrors in when parked.
Integrated LED Signal: Sequential turn indicators.
Side View Camera: The high-definition camera located in the base of the mirror.
Blind Spot Monitoring: The warning light icon inside the glass.
Memory Function: Recalls position based on the key fob or driver profile.

2. 2026 Market Pricing (Per Mirror)

Because this assembly includes the genuine carbon fiber housing and the internal camera module, it is a high-cost component.

Condition	Source	Estimated Price (2026 USD)
New (Genuine Complete)	Authorized Dealer	$4,800 – $6,200
New (Carbon Housing Only)	Genuine Accessory	$1,500 – $1,900
Used (Grade A – 15 Pin)	Specialty Salvage	$2,800 – $3,500

3. Key Versions & Fitment

Carbon Fiber Finish: This is usually the Gloss Carbon finish seen on the Urus S and Performante. In 2026, some “Matte Carbon” versions are also available through the Ad Personam program.
Compatibility: Fits all Urus models from 2018–2026, but only if the car was factory-wired for the 15-pin system. If your car has a 13-pin harness, the 360-camera will not function without significant rewiring.

4. Installation & Calibration (Crucial)

Camera Calibration: If you replace a mirror that includes the side-view camera, the 360° system will often show a “stitching” error on the dashboard screen (where the lines don’t meet up). You must perform a 360° Camera Calibration using a diagnostic tool and specialized calibration mats.
The Housing: The carbon fiber part is technically a “cover” that sits on the mirror frame. If only your carbon is cracked but the camera and motors work, you can buy just the cover (Part No: 4ML857527 / 4ML857528) to save thousands.

5. Common Part Numbers (Reference)

Left Mirror Assembly (15-Pin/Carbon): 4ML857407 (with suffix for carbon/camera).
Right Mirror Assembly (15-Pin/Carbon): 4ML857408.
Replacement Glass (Auto-Dimming): 4ML857521.

Reviews

There are no reviews yet.

Be the first to review “LAMBORGHINI URUS EXTERIOR MIRRORS CARBON 15 PIN CAMERA”