Dodge Charger SRT Hellcat Drive Shafts 53010748AA
For your inventory at Buy Mustang parts Ltd, the part number 53010748AA is a critical high-performance component. Contrary to some general searches, this is not the main longitudinal driveshaft, but the Rear Axle Half Shaft (CV Axle) for the Passenger Side (Right).
This is a “Heavy Duty” axle designed to withstand the massive torque of the 6.2L Hellcat and 6.4L Scat Pack engines.
1. Technical Specifications
| Feature | Specification | Technical Note |
| Component | Rear Right Axle Half Shaft | Position: Passenger Side. |
| Fitment | 2015–2023 Charger & Challenger | Fits SRT Hellcat, Scat Pack, and SRT 392. |
| Material | High-Strength Steel Alloy | Designed for high-stress drag and track use. |
| Weight | ~12.6 kg (27.8 lbs) | Robust construction compared to standard V6/5.7L axles. |
| Interchange | 53010670AB, 53010670AD | Replaces these older supersessions. |
2. Condition & Resale Strategy for Buy Mustang parts Ltd
Hellcat axles are often replaced by owners upgrading to 1000+ HP aftermarket axles (like GForce or DSS). If you have a set in pristine condition, they are highly sought after by Scat Pack owners looking for a “budget-friendly” strength upgrade.
-
CV Boot Inspection: Check the rubber boots for any “clicking” or grease spray. Even a tiny tear significantly reduces the value for a luxury buyer.
-
Spline Count: Verify the splines are clean and not “twisted.” A twisted spline is a sign of a hard life on the drag strip.
-
The “Bundle” Opportunity: If you have both the Left and Right axles, always list them as a matched pair. Buyers doing a performance swap from a 5.7L to a 6.4L/6.2L setup will almost always want both sides simultaneously.
Reviews
There are no reviews yet.