4x Mercedes-Benz AMG 9.5Jx19 ET22.5 AMG GT C SL GLC E Class TOP

X290 GT 4-Door Original | 5-Double Spoke Design | Part No. A2904010200

These wheels are specifically engineered for the Mercedes-AMG GT 4-Door (X290). Featuring a wide 9.5J profile and a relatively aggressive ET22.5 offset, they provide the broad, muscular stance required for high-performance AMG models while clearing large 6-piston braking systems.

Technical Specifications

Vehicle Compatibility & Fitment Intelligence

While originally for the GT 4-door, this specific size and offset are often used for “Square Setups” (same size on all 4 corners) or specific staggered arrangements on other heavy-chassis Mercedes models.  4x Mercedes-Benz AMG 9.5Jx19 ET22.5 AMG GT C SL GLC E Class TOP

• AMG GT 4-Door (X290): This is the Original Equipment (OE) front wheel for the GT 43 and GT 53. It can also be used as a high-clearance winter wheel for the GT 63 S.

• GLC-Class (X253 / X254): Fits exceptionally well on the GLC 43 and GLC 63. The ET22.5 offset pushes the wheel out toward the fender for a flush “wide-body” look without spacers.

• E-Class (W213 / W214): Compatible with the E63 AMG models. On standard E-Class models (E350/E450), the 9.5J width and low offset may cause the tire to poke past the fender unless the car is lowered or has AMG-line fender flares.

• SL-Class (R231 / R232): A strong fit for the SL, especially as a winter alternative to the larger 20/21-inch factory options.

Buying Tips for “TOP” Condition Wheels

2026 Verification Checklist:

• Check for Welds: Because these are low-profile wheels used on heavy cars, inspect the inner barrel for hairline cracks or previous weld repairs.

• Diamond Cut Finish: If the wheels are “Bi-color” (polished face with black/grey pockets), ensure the clear coat is not milky or peeling, which is common in salt-heavy winter climates.

• Center Caps: Genuine A290 wheels use the larger 75mm center caps. Ensure they are included, as the “Affalterbach” crest caps can be expensive to source separately.

• TPMS Sensors: Verify if the RDK/TPMS sensors are pre-installed. For the W223 and X290, the sensors are specific to the 433MHz frequency used by the newer MBUX systems.