Bentley GT GTC Hood Bumper Fender 3SD807437

For the Third Generation Bentley Continental GT and GTC (2018–2024), the part number 3SD807437 identifies the front bumper cover shell.

While the user mentions “Hood” and “Fender,” this specific part number is strictly the bumper structure. It serves as the primary aesthetic and protective face of the 3S chassis.

1. Product Specifications

This bumper is a complex, multi-material component designed to integrate with the vehicle’s advanced aerodynamics and safety systems.

2. Integration with Hood & Fenders

The bumper acts as the “anchor” for several other front-end panels:

• Hood (Bonnet) Gap: The top edge of this bumper defines the leading “shut-line” for the bonnet (3SD823155A). Precise alignment is required to ensure the center “powerline” of the hood aligns with the grille.

• Fender (Wing) Interface: The sides of the bumper wrap around to meet the front fenders (3SD821101/102). They are joined by specialized brackets that prevent the bumper from sagging.

3. Key Technical Components

When buying this part number, it is usually just the “skin.” To complete the front end, the following are often required:

• Grilles: The center matrix grille and the two outer lower air intakes are separate parts.

• Parking Sensors (PDC): The bumper features 4 to 6 pre-drilled holes for ultrasound sensors.

• Headlight Washers: Includes cutouts for the pop-up washer jets.

• ADAS Radar: The lower center section houses the mounting point for the Adaptive Cruise Control radar.

4. Installation & Calibration

• Painting: These parts arrive in gray primer. Paint thickness must be kept within factory tolerances to avoid interfering with radar/sensor signals.

• Sensor Transfer: If you are replacing a damaged bumper, you must transfer the internal wiring loom and sensor brackets.