Lamborghini Huracan STO Seats 1 Piece Carbon 4T38820024XZ0

the part number 4T38820024XZ0 refers to the ultra-lightweight 1-piece Carbon Fiber Bucket Seat specifically designed for the Lamborghini Huracán STO.

These seats are the pinnacle of Lamborghini’s track-focused interior engineering, favoring weight reduction and lateral support over power-adjustable comfort.

1. Technical Identification

• Part Number: 4T38820024XZ0

• Material: Single-piece “Monocoque” Carbon Fiber shell.

• Trim: Typically upholstered in Alcantara with technical 3D fabric inserts for breathability.

• Compatibility: While designed for the STO, it is physically compatible with the Tecnica, Evo, and original LP610/580 models. However, because it is a fixed-back seat, it lacks the motors of standard seats, which may require “dummy” resistors to prevent an airbag/seat-occupancy warning light on non-STO models.

2. 2026 Market Pricing (Per Seat)

Because these are “1-piece” racing buckets, they are significantly more expensive and rarer than the “Sport Seats” found in the Evo.

3. Key Features of the STO Bucket

• Weight: Weighs approximately $11\text{–}13\text{ lbs}$ (shell only), saving roughly $20\text{ lbs}$ per side compared to the standard power-adjustable seats.

• Adjustment: They are manual adjustment only (fore/aft) via a rail lever. There is no power recline or height adjustment; height is fixed via the side-mount brackets.

• Harness Compatibility: The “pass-through” holes at the shoulders are specifically designed to accommodate 4-point or 6-point racing harnesses.

• 4XZ0 Suffix: This specific trim code usually corresponds to the Nero Ade (Black) Alcantara with specific contrast stitching (often Giallo Belenus or Rosso Mars depending on the STO’s launch spec).

4. Installation & Safety Note

• Airbags: These seats do not contain side-impact airbags. In some regions, retrofitting these into a car that originally had side-airbag-equipped seats can lead to insurance or registration issues.

• Seat Belts: While they work with standard 3-point seat belts, the buckle must be correctly routed through the side opening of the carbon shell to ensure proper lap-belt tension.

• Rails: The part number 4T38820024XZ0 usually refers to the seat shell and upholstery. The mounting brackets and floor rails are often sold separately.