Mercedes GLB 247 W247 Multibeam LED Left Right Complete Headlights A2479060106
part number A2479060106 corresponds to the Multibeam LED Headlight (Left/Driver Side) for the Mercedes-Benz GLB-Class (X247) and the B-Class (W247).
Since these models share the same chassis architecture, these high-performance lighting units are common to both, though they are most frequently sought after for the GLB SUVs (GLB 250, GLB 35 AMG).
Component Breakdown
-
A2479060106: Left Side (LHD) Multibeam LED Unit.
-
A2479060206: Right Side (LHD) Multibeam LED Unit (the matching pair).
-
Technology: These feature the advanced 84-pixel matrix system, allowing for adaptive high-beam control and precise illumination of the road surface.
-
Aesthetic: Distinguished by the blue accents inside the housing (common in Mercedes Multibeam units) and the dual-torch LED daytime running light signature.
Technical Specifications
| Feature | Details |
| Model Years | 2019–2024+ |
| Chassis | X247 (GLB) / W247 (B-Class) |
| Complete Status | To be “Complete,” each housing requires the LED Power Module and the Control Module mounted to the bottom. |
| Beam Pattern | Left-Hand Drive (LHD) – for US, European, and Middle Eastern markets. |
Key Inspection Points for Inventory
As you manage inventory for Buy Mustang parts Ltd, here are the professional details to watch for with the X247/W247 series:
-
Lens Shape: The GLB headlight has a very vertical, boxy front face. This makes it more susceptible to direct stone impacts (cracks) compared to the more aerodynamic swept-back designs of the CLA or S-Class.
-
Mounting Tabs: Check the upper “bridge” tabs. On the GLB, these are often the first things to snap in a minor “fender bender.” If they are repaired with a tab kit, ensure the alignment is still laser-straight, as even a 2mm deviation will cause a noticeable gap between the bumper and the hood.
-
Moisture Seals: Mercedes 247-series headlights have a specific rear gasket. If you notice any “whitish” residue inside the lens, it indicates previous moisture ingress which can corrode the internal LED matrix.
Shipping & Handling
Because the GLB is a “taller” vehicle, the headlights are quite deep.
-
Box Size: Use a minimum 50cm x 40cm x 40cm box to ensure enough room for “crush space.”
-
Protection: Focus padding on the rear electrical connector pins. These are exposed and can be bent easily if the unit shifts inside the box.
Reviews
There are no reviews yet.