Rolls Royce RR6 Wraith Dawn Side Skirts Left Right

For the Rolls-Royce Wraith (RR5) and Rolls-Royce Dawn (RR6), the side skirts (rocker panels) are essential body components that share the same mounting architecture but feature distinct sculpted lines. While many mechanical parts are shared between these two models, the side skirts are specific to their respective body shapes (Coupe vs. Convertible).

1. Core Part Numbers (OEM)

Original side skirts are typically supplied in a primed state from the factory, requiring professional paint matching to the car’s specific “Bespoke” color code.

2. Technical Differences & Compatibility

• Wraith vs. Dawn: The Dawn’s side skirts are subtly different in profile near the rear wheel arch to accommodate the convertible’s structural reinforcements and folding roof drainage channels. They are not directly interchangeable without modification.

• Black Badge Trim: If your vehicle is a Black Badge, the skirts are physically the same but often feature a high-gloss black finish or an additional Carbon Fiber Lower Splitter (Part No. 51192451457).

• Mounting Hardware: The RR5/RR6 chassis uses a plastic Holder Strip (Part No. 51777320723) that runs the length of the rocker. This strip often breaks during removal and should be replaced with the new skirt to ensure a perfect “waft-line” fit.

3. Market Value (2026 Estimates)

As the Wraith and Dawn ceased production in 2023, original parts are now categorized as legacy stock.

• New Primed (Dealer): Expect to pay approximately

• Used/Take-off (Painted): Pristine used units in common colors (like English White or Diamond Black) range from

• Carbon Fiber Upgrades: In 2026, many owners opt for Mansory or Novitec carbon fiber side extensions. A set of high-quality carbon fiber side skirts currently retails for

4. Installation & “Light Carpet” Note

• Puddle Lighting: Later models (2017+) feature the LED “Welcome Light Carpet” projected from the underside of the mirrors or the sills. Ensure the wiring harness is correctly transferred into the internal clips of the new side skirt.

• The Jack Point Caps: Side skirts are often shipped without the four circular jack hole covers (51777301431). Ensure you transfer these from your old panels or order them separately.

• Torque Spec: The lower mounting screws (T25 Torx) should be tightened to 5 Nm. Over-tightening can crack the plastic eyelets of the skirt.