ROLLS ROYCE WRAITH RR5 COUPE Tailgate

For the Rolls-Royce Wraith (RR5), the tailgate (boot lid) is a significant aluminum body panel. In 2026, original parts for the Wraith are highly specialized as the model concluded its production run in 2023, making pristine “New Old Stock” (NOS) or high-quality recycled units the primary options.

1. Core Part Numbers & Identification

The Wraith tailgate is technically referred to as the Trunk Lid Shell. It is shared across the Wraith production years (2013–2023) but differs from the Dawn (RR6) convertible trunk lid.

2. Technical Features: The Spindle Drive System

Unlike traditional sedans with simple gas struts, the Wraith utilizes a heavy-duty Electronic Spindle Drive system.

• Automatic Operation: The tailgate is fully powered and can be operated via the key fob, the interior dashboard button, or the “Comfort Access” kick gesture under the rear bumper.

• Soft-Close: The system features an integrated “Soft-Close” actuator that pulls the lid into the final locked position to avoid a loud slamming sound, preserving the car’s “Quietness” ethos.

3. Market Value (2026)

• Brand New (Genuine Rolls-Royce): Approx.. These typically arrive in a green or grey primer and require a full paint-matching process.

•  If you can find one in your factory color (e.g., English White or Diamond Black), you can save significantly on paint costs.

• Trim & Finishing: Note that the chrome (or Black Badge dark chrome) “Rolls-Royce” plinth and the “Double R” badge are usually sold separately from the metal shell.

4. Installation & Calibration

Replacing a Wraith tailgate involves complex electronics:

1. Module Pairing: The Tailgate Control Module must be synced with the car’s Central Gateway (ZGM). If you replace the lid or the motors, the “Auto-Open” height limit often needs to be recalibrated using a diagnostic tool.

2. Weather Sealing: The seal (51767301515) is critical. If not seated perfectly, the Wraith’s rear electronic modules (located in the trunk floor) can suffer from water ingress, leading to expensive failures of the audio and suspension computers.

3. Shut-Line Alignment: Due to the fastback design of the RR5, the gaps between the tailgate and the rear quarter panels must be exactly 3.5mm.

5. Associated Parts

• Gas Struts: Even with the electronic spindle, there are auxiliary struts (Part No. 8066BB) that assist the initial lift. These should be replaced as a pair if the trunk feels “heavy” or fails to open fully in cold weather.

• Trunk Finishing Plate: The interior carpeted cover for the lid (51477267403) is often sold separately and is specific to the interior color of your vehicle.