taillights for Toyota GT86 & Subaru BRZ

taillights for the Toyota GT86 and Subaru BRZ are among the most popular modification points for the ZN6/ZC6 platform. Because the first-generation car was produced for nearly a decade, there are three distinct “eras” of taillights to consider, ranging from factory OEM replacements to high-end aftermarket sequential units.

1. OEM Generations & Compatibility

All first-generation (2012–2021) taillights are physically interchangeable and use the same mounting points. However, the wiring pins changed slightly between the early and late models.

• Retrofit Tip: To install 2017+ OEM “Kouki” lights into a 2013 car, you will need a re-pinning kit or an adapter harness to account for the integrated LED signals.

2. Popular Aftermarket Options

The aftermarket for these cars is dominated by three major brands, each offering a distinct aesthetic:

• Valenti (Jewel LED): The industry standard. Available in “Revo” or standard styles.

  • Feature: Famous for the “opening animation” and sequential turn signals.

  • Warning: Early versions are prone to condensation; using a thick foam gasket (like Gasket Ninja) is a mandatory upgrade during installation.

• VLAND: Often styled after the 2017+ OEM look but with darker smoked lenses or “GTS-style” OLED scales. They are generally more affordable than Valenti but offer a very modern, aggressive look.

• Buddy Club: Features a unique “Lamborghini-style” Aventador arrow lighting signature. These are known for being very bright but have a polarizing, non-OEM aesthetic.

• Intec: A unique “Tail Light Cover” that completely deletes the circular cutouts for a smooth, Ferrari-style round light appearance.

3. Common Technical Issues

• Hyperflash: When switching from the early 2012–2016 halogen indicators to LED aftermarket units, your turn signals will flash too fast. You must replace the flasher relay (located under the driver-side dash) with an LED-compatible one (e.g., TapTurn or Diode Dynamics).

• Condensation: Water ingress is common due to the flat mounting surface of the rear chassis. Always inspect the foam seal before bolting the lights down.

• ECE/TÜV Approval: If you are in Europe, many aftermarket units (like some Valenti variants) are not E-marked. Look for the E-mark stamp on the lens to ensure they are road-legal.

4. Part Numbers for Inventory

• Left (LH) 2012-2016 OEM: SU003-02511

• Right (RH) 2012-2016 OEM: SU003-02510

• Left (LH) 2017-2021 OEM: SU003-06987

• Right (RH) 2017-2021 OEM: SU003-06986