Bentley Mulsanne Bumper Hood Fender 2018

For the 2018 Bentley Mulsanne (the facelifted “Second Generation” model), the front body panels are distinct from the earlier 2010–2016 versions. The 2018 model features a wider, more integrated front grille and re-sculpted bumper and fender lines.

1. Front Bumper Cover (3Y0807217)

The 2018 facelift introduced a much wider stainless steel matrix grille that flows into the bumper.

• Part Number: 3Y0807217 (Shell only).

• Design: The 2018 bumper features a continuous lower brightware strip that runs the full width of the car, connecting the outer grilles.

• Sensors: Includes mounts for 6 Ultrasound Parking Sensors and the Adaptive Cruise Control (ACC) radar behind the lower center grille.

• Headlight Washers: Features integrated pop-up covers for the lamp cleaning system.

2. Hood / Bonnet (3Y0823031C)

The Mulsanne hood is a massive piece of hand-finished aluminum.

• Part Number: 3Y0823031C (Superseded versions may end in D or E).

• Construction: Unlike the Continental series, the Mulsanne hood is extremely long and features a “seamless” transition into the radiator shell.

• Facelift Note: The 2018 hood is designed to sit flush with the 80mm wider radiator shell. A pre-2016 hood will not align correctly with the 2018 grille and bumper setup.

• Safety: Equipped with pyrotechnic hinges for pedestrian protection.

3. Front Fenders / Wings (3Y0821101 / 3Y0821102)

The 2018 fenders are re-profiled to accommodate the wider front-end styling.

• Left (Driver): 3Y0821101

• Right (Passenger): 3Y0821102

• Vent Detail: Features the iconic “B” wing vent. On 2018+ models, this vent often features a “Speed” badge if equipped with the 530bhp engine.

• Material: Superformed aluminum. These are extremely difficult to repair due to the thickness and temper of the aluminum used for the Mulsanne’s massive haunches.

4. Critical Compatibility Note

If you are performing a Facelift Conversion (updating a 2012 car to a 2018 look), you cannot replace just one part. The 2018 Bumper, Hood, Grille, and Headlights must all be replaced together as the mounting points and shut-lines were significantly altered to create the wider appearance.