McLaren 720s Front Bumper 14A0152CP

the part number 14A0152CP refers to the Front Bumper Cover (Skin) for the McLaren 720S.

This part is the main “nose” of the car. On a 720S, the bumper is a complex aerodynamic piece that incorporates the “eye socket” intakes that feed the radiators.

1. Technical Identification

• Material: Typically high-grade composite (unless specified as MSO Carbon Fiber).

• Fitment: Designed for the 720S Coupe and Spider.

• The “CP” Suffix: Indicates it is a core production part. Note that this is the bumper skin only; it does not typically include the carbon fiber “eye sockets,” the front splitter, or the internal ducting, which must be transferred from the old unit or purchased separately.

• Compatibility: This bumper will not fit the 765LT, as the 765LT has an elongated nose and different mounting points for the extended splitter.

• Key Installation Notes

  • The “Eye Sockets”: The 720S is famous for its aero-bridges (the headlights/intakes). The 14A0152CP skin acts as the frame for these. When installing, the alignment between the bumper skin and the carbon fiber intake inserts is critical; if they are not perfectly flush, you will hear wind whistling at high speeds.

  • Paint Matching: McLaren paints (like Memphis Red or Lantana Purple) are often multi-stage pearls. Painting a new 14A0152CP bumper can cost an additional $2,000 – $4,000 to ensure a perfect match with the hood and fenders.

  • Parking Sensors & Cameras: The bumper has pre-drilled or marked locations for the front parking sensors and the 360-degree bird’s-eye view camera (if equipped). Ensure your harness is correctly routed before final bolting, as access is restricted once the fender liners are in.