Toyota Supra A90 MK5 bumper

In Stock

$700.00

Toyota Supra A90 MK5 bumper

upgrading the Toyota Supra MK5 (A90/A91) bumper involves navigating a complex mix of BMW-sourced electronics and modern aerodynamic engineering. Whether you are looking for an OEM replacement or a radical “facelift” style, here is the technical breakdown.

Toyota Supra A90 MK5 bumper

upgrading the Toyota Supra MK5 (A90/A91) bumper involves navigating a complex mix of BMW-sourced electronics and modern aerodynamic engineering. Whether you are looking for an OEM replacement or a radical “facelift” style, here is the technical breakdown.


1. Front Bumper: OEM vs. Major Aftermarket Kits

The front bumper on the A90 is a high-impact area. While the OEM shell is functional, many owners move to aftermarket options to eliminate the “factory hump” or the fake air vents.

  • OEM Front Bumper (5111-8811298): This is a three-piece assembly. The central “nose” is notoriously difficult to paint-match if replaced in isolation. Used OEM shells typically cost $350 – $500, while new primed units from Toyota can exceed $800.

  • ADRO “Facelift” Bumper: Perhaps the most popular aftermarket swap. It redesigns the front end to be lower and wider, eliminating the center “beak” and providing a 300% increase in downforce.

     

    • Cost: ~$1,890 (Bumper only) to ~$2,550 (Bumper + Carbon Lip).

  • Robot Craftsman (Alerion/Hyperion): Offers a more aggressive, angular look with optional forged carbon fiber accents.

     

    • Cost: ~$1,090 – $3,400 depending on carbon content.

2. Rear Bumper: Components & Diffusers

The rear is modular, allowing you to replace the lower diffuser without replacing the entire painted bumper shell.

  • OEM Main Cover (5112-8811312): Usually retails for $330 – $400 used.

  • Key Rear Components:

    • F1-Style Brake Light: A central LED located in the diffuser.

    • PDC Sensors: The bumper houses 4-6 ultrasonic parking sensors.

    • Reflectors & Spats: Many owners replace the plastic “side spats” (rear bumper corners) with carbon fiber versions for a wider look.

       

3. Critical Technical Challenges

Replacing a bumper on the MK5 isn’t just a “nuts and bolts” job due to the integrated tech:

  • Parking Sensors (PDC): Aftermarket bumpers often require custom brackets or “drilling” to relocate the factory sensors. If the sensors are misaligned by even a few degrees, you will get a constant “Parking Assist Malfunction” error.

  • Active Cruise Control (ACC): If your Supra has the Premium package, the radar sensor is located in the lower-center intake. Blockages or changes in the bumper’s geometry can disable your cruise control and emergency braking systems.

  • Aerodynamic Balance: The MK5 is sensitive to “lift” at high speeds. If you install an aggressive front bumper like the ADRO unit, it is highly recommended to balance it with a functional rear wing to prevent high-speed instability.


Comparison Summary

Feature OEM (Stock) Performance Aftermarket (ADRO/Robot)
Material Polypropylene (PP) PP, Carbon Fiber, or FRP
Aero Utility Balanced for Street High Downforce (Track-focused)
Fake Vents Present Often Removed/Functional
Complexity Direct Fit Requires Sensor Calibration

Reviews

There are no reviews yet.

Be the first to review “Toyota Supra A90 MK5 bumper”

Your email address will not be published. Required fields are marked *

Recently Viewed Products

No recently viewed products to display
Shopping Cart

You cannot copy content of this page

Scroll to Top