VW ID4 Headlights Left Right 11B941005B 11B941006B

Manufacturer Code: 11B.941.005.B (Left) / 11B.941.006.B (Right)

Alternate Reference: 11B941030B (Right comparison number)

Generation: Volkswagen ID.4 / ID.5 (MEB Platform)

Lighting Technology: Full LED / IQ.LIGHT Matrix LED

These part numbers refer to the Full LED headlight units for the Volkswagen ID.4 and ID.5. Depending on the specific suffix and vehicle configuration, these can range from the standard “High” LED units to the advanced IQ.LIGHT Matrix systems. The “B” revision typically indicates a specific hardware version or regional specification (such as European-spec).

Technical Features

• Adaptive Functionality: If configured as IQ.LIGHT, the units feature 18 individual LED units per module, 11 of which can be selectively dimmed or switched off to prevent dazzling oncoming traffic.

   

• Welcome Sequence: The “eye” modules can swivel on a vertical axis, creating a “waking up” animation when the driver approaches the vehicle.

• Dynamic Indicators: Integrated support for sweeping LED turn signals.

   

• Integrated DRL: Features the signature “Light Strip” daytime running light that connects to the central VW emblem.

Cross-Reference & Compatibility

Installation & Professional Notes

1. Module Transfer: These headlight housings are often sold without the LED Power Modules (Control units). You must transfer your existing modules or purchase new ones (e.g., Part No. 992.941.591.DG).

2. Coding (SFD Protection): The ID.4 uses the SFD (Vehicle Diagnosis Protection) protocol. Replacing a headlight requires “unlocking” the control module via an authorized online connection (ODIS) to perform basic settings and adaptation.

    

3. IQ.LIGHT Retrofitting: While these units can physically fit a base ID.4, retrofitting Matrix functionality into a car that originally had standard LEDs is complex. It requires additional wiring for the CAN-bus and a front camera with high-beam assist capabilities.

4. Calibration: After physical installation, the beam height and “cut-off” line must be calibrated using a digital headlamp aimer to ensure compliance with road safety standards.

Maintenance Tip

The polycarbonate lenses on ID.4 headlights are treated with a UV-resistant coating. Avoid using abrasive polishing compounds or harsh chemicals, as once the factory coating is stripped, the large lens surface is prone to rapid oxidation (yellowing) due to its aerodynamic tilt.

Would you like me to generate a studio-quality product image of these ID.4 headlights for your catalog, or do you need the specific VCDS coding steps to initialize the LED modules?