Audi A4 B9 Facelift Front Bumper Black
Audi A4 B9 Facelift (B9.5 / 2020–2024), the “Black” front bumper usually refers to the Black Optic / Black Edition trim. This is the most aggressive factory look available before moving into the RS4 category.
Given your focus on logistical speed and luxury inventory, here are the critical technical details for this specific facelift bumper.
1. B9 vs. B9.5 (The Facelift Distinction)
It is vital to distinguish between the Pre-facelift and Facelift models, as the parts are not interchangeable:
-
B9 (2016–2019): Features “straight-edge” headlights and a smaller grille.
-
B9.5 Facelift (2020–2024): Features “teardrop” notches in the headlights and a wider, flatter Singleframe grille. The bumper skin for the B9.5 also has a thin air intake slit between the hood and the grille.
2. Black Optic Package Components
The “Black” look is achieved through specific gloss black components rather than just the paint color of the skin. A complete B9.5 S-Line/Black Edition bumper assembly includes:
-
Main Bumper Skin: Often sourced under part numbers like
8W0807065(verify by sub-suffix for S-Line). -
Gloss Black Honeycomb Grille: The primary visual upgrade, replacing the chrome-slat version.
-
Side Air Intakes (Fog Light Grilles): For the B9.5, these are massive gloss black inserts that often house the ACC (Adaptive Cruise Control) radar sensors.
-
Lower Splitter: A three-piece lower lip usually finished in Gloss Black or Carbon Fiber.
3. Fitment & Conversion Table
| Vehicle Base | Compatibility with B9.5 S-Line Bumper | Requirements |
| Standard A4 (SE) | High Modification | Requires new S-Line side brackets, different undertray, and matching S-Line grilles. |
| S-Line / S4 B9.5 | Direct Swap | The A4 S-Line and S4 share the same fundamental bumper structure for this generation. |
| Pre-Facelift B9 | Full Front-End Swap | Requires new B9.5 headlights, fenders, hood, and grille to fit the bumper skin. |
4. Technical Sourcing Tip
If you are managing inventory for this model, pay close attention to the Park Assist (7X5) vs. PDC (7X2) configurations:
-
Standard PDC: 4 sensors across the front.
-
Park Assist: 6 sensors (includes two additional sensors on the far sides near the wheel arch).
Inventory Note: Many high-end clients looking for “Black” bumpers are actually seeking RS4-style conversion kits in gloss black. These kits are often made of PP (Polypropylene) and include the RS honeycomb mesh but are molded to fit the narrower standard A4/S4 fenders, saving the customer the cost of widebody fenders.
Reviews
There are no reviews yet.